Time & Temp for Berkshire Pork Chops? (First Post)

In the Getting Started with Sous Vide Forum
This will be my first cook (other than eggs) in my sous vide set-up (crock pot, DSV temp controller, Ziplocs) and thought these chops would be a good place to start. I've read that times can vary with the type of meat and wondered if I should alter the cooking times and/or temps from the 131* for 12 hours that I see for regular pork. Any guidance will be much appreciated. ADV


7 Replies So Far

I'd personally do them a little hotter (like 134-138) and much shorter (1-2 hrs)

then a quick sear or crust to finish
WOW! That's a big difference. Have you done Berkshire pork yourself? What would be the "hold" time after the 2 hours? Could I leave them in for another hour or two? They weigh about 10 oz. and are 1-1/2" thick. Thanks for the help. ADV
I'll preface this with I haven't done Berkshire pork specifically but I've done store bought as well as local farm raised from several different farms in my area.

I also tend to prefer sous vide pork done at 138°F, it still has some pink in the middle but has a firmer texture than at 131°F. The tenderness of pork chops can really vary depending where they are cut from but I typically do 2 to 4 hours and in a pinch I've done them up to 12, they get softer at that length but they're still real good.

It sounds like you're leaning towards 4 hours or so and I think that would be just fine. And if they're tender you can definitely get away with 1.5-2 hours like @weedy said.
Well, that settles it. 138 for 3 hours and we'll see what happens. I'm planning for Sat. Night and will report back with the results. Thank you for the quick responses. ADV
I HAVE done Berkshire pork (from D'Artagnan), and I agree that although it would be done in 2 hours for sure, you can certainly leave it for 4 without it being noticeably much different.

have fun!
Can't say I've ever experienced Berkshire pork but pork chops are generally lean and a covering of fat, with little if any connective tissue so don't really benefit from long cooking. I haven't SVd much pork but just under 140F (60C) was the temp I've used.
I'm very pleased to report that my first attempt was a total success. The chops were cooked at 138 and removed after 3-1/2 hours. Pleasantly pink, super tender, and very juicy, my only complaint was the pork itself didn't taste as " porky" as I expected. I'll be taking up that matter with the provisioner. Also, the next time I plan on doing the sear on the grill or on a hot plate in the garage. It got a tad smoky in the kitchen. I'm looking forward to rib-eye steaks purchased from my local Publix. Again, I want to thank all who advised me. I'm sure I'll be showing up here again with more questions. What a great site! ADV


Reply to this Topic

In order to add a reply to this topic please log in or create an account, it's free and only takes 30 seconds.









placeholder image

Cookie Consent

This website uses cookies or similar technologies, to enhance your browsing experience and provide personalized recommendations. By continuing to use our website, you agree to our Privacy Policy